Fire Alarm System Parts Training

Any fire alarm system consists of subsystem parts or components no matter the system was :

1 Conventional fire alarm system or,

2 Addressable fire alarm system or,

3 Wireless fire alarm system There are some of fire alarm system parts that are essential in any design and others are optional or applied according to certain cases.

The essential fire alarm system parts are:

1- Fire alarm control panel:

Of course the fire alarm panel is essential part of any fire alarm system because it is considered the brain of the system. It receives the alarm signal from the initiating devices or detectors and send or transmit a signal to fire fighting people or activate audible devices to evacuate the building.

It could be conventional or addressable fire alarm panel depending on the system applied. See the difference between conventional and Addressable fire alarm system.



2- Fire alarm Manual Call Point  ( fire alarm push button )

In any design of home fire alarm or office even factory fire alarm system; manual call points are installed.

The reason for this obligation is that in case of early fire some detectors are not yet energized so if any person was there (at place of fire initiating ) and saw the beginning of fire break out he will push immediately the manual call point to send alarm signal to the fire fighting people and don’t wait unit fire to breakout.

One more thing is recommended is to put a Polycarbonate protective cover on your manual pull station to prevent false alarms specially at home (if you have kids) and also at yards in large factories and warehouses.

This plastic cover is used to guarantee that there is a real fire and some one is removing the cover and pulling the manual pull station Any fire alarm manual pull station should be accompanied by flusher& sounder unit to indicate alarm condition for the firefighters.

3- Smoke detector:

The smoke detector is used in almost 95% of fire alarm installation. It is applied widely in houses , hotels , airports and other applications.

There is a detector that has smoke detection and self buzzer voice warning in case of alarm ,it is very useful in houses

 4- Heat detector:

There are two types of heat detectors:

a- Rate of rise heat detector: This type of detector is sensing the change of the temperature in a given time (example: if there is a temperature rise of 10 degrees in one minute ;there is a fire).

b- Fixed temperature heat detector:  This type of detector is sensing when the temperature reaches a certain limit (example: if the temperature reaches 60 degrees Celsius it triggers an alarm signal to the control panel)  There are heat detector which combines the two types(ROR+FX) in one unit.

It is really a practical double check solution which is better than individual of each.

These are the primary and the common fire alarm parts used in any alarming system.



Do you want to know what is the details and secrets of “fire alarm” is all about quickly if you don’t have time to study and make searches for months or even for years? Did you get tired from searching and you have no experience in the fire alarm field and want to know how to design and install a fire alarm system?

IF YOU ARE INTERESTED TO KNOW ALL FIRE ALARM VALUABLE INFORMATION CLICK “BUY NOW” AND PURCHASE THE FIRE ALARM TRAINING COURSE “PDF” E-BOOK AND DON’T WASTE YOUR TIME.

FIRE ALARM DESIGN GUIDE e-Book